Gauge Wheel Set, Tire Wheel & Hub Mounted on 5/8″ x 2″ Shank

Description Gauge Wheel Set, Tire Wheel & Hub Mounted on 5/8″ x 2″ Shank The Gauge Wheel Set, Tire Wheel & Hub Mounted is mounted on a 20″ Shank Part # SGWHL Gauge Wheel Set is to be affixed to a  Part# HT02-04-L4 2 x 2 Toolbar with a Part # S22WOOD 5/8″ x 2″ Flat Shank Clamp  (Below – Sold Separately) (Sold Separately) The purpose of  installing a Gauge Wheel Set is to help control the depth of the piece of equipment that you also have on the toolbar, such as a furrower, hiller or cultivator. Tire size is 9 ¾’ High x 3 1/8” Wide Weight capacity is 300#’s. Overall Length: 21 Inches With Just 1 Hitch and a Toolbar, You Can Build Many Implements! Heavy Duty – Up to 85 HP Includes Pins Cat I Hitch Pins: Diameter .750″ Useable Length 2.750″ Overall Length 4.500″ WUNDERBAR 3 PT. HITCH DIMENSIONS: 17″ from Top Pin to Lower Pin Upper Link is 3/4″ Lower Links are 7/8″ Pin to Pin – Center to Center – 26″-28 Spacer Bars, Toolbars & Attachments Sold Separately Hill Potatoes & Build Rows to Keep Dirt Close to Crops by Adding Disc Hillers and Disc Hiller Clamps Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower By using 2 “Spacer Bars” to the Wunderbar Cat I Hitch and Adding an Additional Toolbar, You Can Make Your Own 2-Row Cultivator and More! Wunderbar Cat I Hitch with Double Row Cultivator Set Cultivate Crops by adding S-Tines, S-Tine Clamps and Sweeps Our Wunderbar Cat I Hitch is Recommended for Use with our Components or Components that a Similar in Size and Function Part #HT02-04-L4 Toolbar Sold Separately One Toolbar, One Hitch and Create Many Implements in Just a Few Minutes! Tools Needed: 1 5/16” Socket to snug up the Toolbar on the 3 Pt. Hitch 1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar 9/16” wrench to tighten up the Disc Hillers in the Disc Hiller Clamp 5/8” Wrench to snug up Flat Shank to the Flat Shank Clamp ¾” Wrench to snug up Flat Shank Foot Pieces (2) 3/8” x 3” bolts and washers to affix the Furrower to the Foot Piece 9/16” Wrench to snug up the bolts to Foot Piece and Furrower Snug up Elliptical Bolts on S-Tines with 9/16” wrench 3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts to fasten the S-Tine Clamps to the Toolbar 11/16” wrench to snug up the bolts on the S-Tine Clamps Wowsers! Above is a pic submitted by David Mastin of New York. Showing our CAT I 3 Pt. Hitch, 18″ Spacers, 6 Ft. Toolbars, our 5/8″ Shanks, and Straight Chisel Spikes. David painted his toolbars John Deere Green. Quite impressive! Thanks, Dave for Sharing!