Starlink RV Flagpole Adapter

Flagpole Adapter TKO Clamping Systems has an answer for everyone trying to attach a flagpole to the ladder on your RV with our Starlink RV Flagpole Adapters. A flagpole is a easy way to extend your Starlink Flagpole Adapter antenna above your RV for the best reception possible. If your flagpole is attached to the rear ladder you can either lower the pole to get the antenna below the top of the RV or easily remove the entire system for transport with the TKO adapters. After initial setup the flagpole can be installed or removed from the ladder in a couple of minutes. Works great for Cell Phone Boosters  Our flagpole adapters also work great to mount a cell phone booster on your RV, trailer or vehicle with a ladder. Everyone Is Talking About Starlink Everyone is talking about the Starlink Flagpole Adapter and there are adapters and hacks all over the internet. If you are trying to attach a pole to your RV ladder we have clamps from 3/4” to 3 1/4”. We just need the dimensions for the pole and the ladder. In our example we used a 20’ telescoping flagpole from Harbor Freight. The customer in our photos wanted the flagpole to release easily and the clamp set to remain on the ladder. Normally we build the adapters to remain on the flagpole and easily release from the ladder. Each set of Starlink RV Flagpole Adapters consists of four clamps, two back to back. One for the pole and the other end for the ladder. Pro Series Line of Products Our Pro Series Line of Products are machined out of solid 6061 T6 aluminum and are built to the “Quality of the Pro but still priced for the Regular Joe”. Customize Your Order With our system you tell us how you want it built. Which clamp, what sizes and what configuration. You can mix and match between two different clamp styles and four different configurations depending on how you plan to use your Starlink. See the details below to help you decide what would work best for you. Our Standard Clamps are three piece and wrap around your bar and easily release for those that want to quickly remove or install. They also and have a security screw (not required) to keep someone from quickly popping your accessory off and taking it. Our HD (heavy duty) Clamps are a two piece clamp for situations where you want a sturdy clamp that you plan on leaving in place a little longer. You can also choose from front or back tighten depending on clearances in the area you plan to use the clamps. Cable Guides Some customers have asked for a cable guide. This can be accomplished by using an HD Double Lug Clamp with an eyelet and costs an extra $10 for a set. See the photo above. Contact us for this option. Your order is customized for your situation. You have five opinions to choose from. Pole to Ladder HD to HD works great when you want to leave everything installed. HD to HD HD to HD   HD with Cable Guide to HD works great when you want to secure your cable down the side of the flagpole. Uses an HD Double Lug on the flagpole side and costs an extra $10 for a set. Call us to add cable guides. HD double lug with cable guide   HD to Standard works great if you want to remove everything from the ladder but leave the clamps installed on the pole for storage. HD to Standard option HD to Standard   Standard to HD works great if you want to leave everything installed but want to easily lower the pole in situations where you don’t have a telescoping pole. Standard to HD Standard to HD     Standard to Standard work in situations where you want everything to be easily removed. Standard to Standard Standard to Standard Just let us know which option fits your situation. Includes (2) Sets of clamps. 2 ladder clamps and 2 pole clamps. Clamp Sizing We need an accurate measurement. For example customers who purchase a Harbor Freight flag pole often tell us it’s 2” when in fact it is 2.3”. If the size on the drop down menu isn’t the exact size you measured, choose the next larger size. If you have any questions choosing the size, contact us for help. YouTube Product Review Check out a review of our Starlink Flagpole Adapter clamps from Shane’s DIY YouTube Channel. Examples Several companies sell flagpoles and here are a few examples. Starlink has a pole as well, and makes an adapter to connect the antenna to the top of the pole. Our good friends at Poles and Holders have a Starlink Pole as well as Starlink Mounts that fit the top of the poles. Check them out at Poles and Holders.  You may want to use their base holder if you want to attach to your bumper or use their pole and our holders to attach it to your ladder.  Harbor Freight also has a telescoping flag pole and Etsy has numerous examples of adapters to attach your Starlink antenna to the top of your flagpole. Made in America We make all of our TKO Clamping Systems Accessory Mounts in house at our Pocatello, Idaho shop right here in the USA. Machined from 6061 T6 aluminum. Other TKO Products Check out some of our other great accessories. Flag/Whip Antenna Mount or our GoPro Mount. Both can be manipulated to achieve the desired vertical or horizontal angle no matter your bar angle. International Shipping For international shipping orders please contact us with your address so we can get you an accurate shipping cost to your destination. (307) 733-3063 or email us. Questions? If you have any questions not covered here send us an email or call us at (307) 733-3063. Contact Us